Unlock Your Favorite Fox Channels: A Guide to Satellite Frequencies and Tuning
Are you looking to expand your television horizons and access a wider range of Fox content from around the globe? Satellite television offers a vast array of channels, but successfully tuning them in requires specific technical parameters. This article provides a detailed breakdown of various Fox channels, their corresponding satellite frequencies, and an explanation of what these terms mean for your setup.
Understanding Satellite Broadcast Parameters
Before diving into the list, let's briefly explain the key terms you'll encounter:
Frequency (MHz): This refers to the specific radio frequency at which the satellite signal is transmitted. Your receiver needs to tune into this exact frequency to pick up the signal.
Polarization: Satellite signals are transmitted with a specific polarization, either Horizontal (H) or Vertical (V), or sometimes Circular (Left or Right). Your LNB (Low Noise Block) on the satellite dish needs to be correctly aligned to match this polarization to receive the strongest signal.
Symbol Rate (kHz): This indicates how many symbols (or data changes) per second are transmitted. It's a measure of the data throughput of the signal. Entering the correct symbol rate is crucial for your receiver to decode the information accurately.
FEC (Forward Error Correction): This is a ratio that represents the amount of redundant data added to the transmission to allow the receiver to correct errors that occur during signal transmission due to interference or weak signals. A higher FEC (e.g., 5/6) means less error correction but potentially more user data, while a lower FEC (e.g., 2/3 or 3/4) provides stronger error correction at the cost of some bandwidth.
Fox Channels Satellite Frequency Guide
Here's a list of various Fox channels and their satellite tuning parameters. Please note that these frequencies can sometimes change, so it's always a good idea to check for the most current information or perform a "blind scan" if available on your receiver.
Fox News & Business (Various Feeds):
Channel: Fox News
Frequency: 12226 MHz
Polarisation: Horizontal
Symbol rate: 27500 kHz
FEC: 3/5
Channel: Fox News
Frequency: 12034 MHz
Polarisation: Vertical
Symbol rate: 29900 kHz
FEC: 3/4
Channel: Fox Business
Frequency: 12034 MHz
Polarisation: Vertical
Symbol rate: 29900 kHz
FEC: 3/4
Channel: Fox News
Frequency: 10721 MHz
Polarisation: Horizontal
Symbol rate: 30000 kHz
FEC: 3/4
Channel: Fox News
Frequency: 12422 MHz
Polarisation: Horizontal
Symbol rate: 30000 kHz
FEC: 3/4
Fox International (Russia & Movies):
Channel: Fox HD Russia
Frequency: 11221 MHz
Polarisation: Horizontal
Symbol rate: 30000 kHz
FEC: 2/3
Channel: Fox Life Russia
Frequency: 11221 MHz
Polarisation: Horizontal
Symbol rate: 30000 kHz
FEC: 2/3
Channel: Fox Action Movies HD
Frequency: 12169 MHz
Polarisation: Horizontal
Symbol rate: 27500 kHz
FEC: 5/6
Fox Sports (Argentina Feeds):
Channel: Fox Sports 1 Argentina
Frequency: 3979 MHz
Polarisation: Left Circular
Symbol rate: 23300 kHz
FEC: 5/6
Channel: Fox Sports 2 Argentina
Frequency: 3979 MHz
Polarisation: Left Circular
Symbol rate: 23300 kHz
FEC: 5/6
Channel: Fox Sports 3 Argentina
Frequency: 3979 MHz
Polarisation: Left Circular
Symbol rate: 23300 kHz
FEC: 5/6
How to Use This Information to Tune Your Receiver
Most satellite receivers offer a "Manual Scan" or "Add Transponder" option within their menu. To tune in these channels:
Access your Receiver Menu: Look for "Installation," "Channel Search," or "Satellite Setup."
Select Manual Scan/Add Transponder: This option allows you to input specific satellite parameters.
Enter the Parameters:
Input the Frequency (e.g., 12226).
Select the correct Polarization (Horizontal, Vertical, Left Circular).
Enter the Symbol Rate (e.g., 27500).
Input the FEC value (e.g., 3/5).
You might also need to specify the Satellite Name/Position if your dish is pointed at multiple satellites (e.g., Hot Bird, Astra, etc.). This information is not provided in the list above but is crucial for successful tuning.
Start Scan: Initiate the scan for that specific transponder. Your receiver should then find all channels transmitting on those parameters.
Save Channels: Once the scan is complete, save the newly found channels.
Important Considerations:
Satellite Position: The provided frequencies correspond to specific satellites orbiting the Earth. You need to know which satellite your dish is pointed at (e.g., different Fox feeds might be on different satellites). If your dish is fixed, you'll only receive channels from that specific satellite.
LNB Frequency: Most receivers also require an LNB frequency (e.g., Universal LNB is usually 9750/10600 MHz or 10750 MHz). This is typically a default setting but important to check if you're having issues.
Signal Strength and Quality: Ensure your satellite dish is correctly aligned for optimal signal strength and quality. A professional installer can assist if you're experiencing persistent signal problems.
By utilizing these detailed satellite parameters, you can precisely tune your receiver and access a broader range of Fox programming, from breaking news to thrilling sports and captivating movies, directly through your satellite dish.
